8957102
14 in. Electric Wet/Dry Concrete Saw
V4.0
6
For technical questions call 1-800-665-8685
OPERATIONS
CUT-OFF MACHINE SAFETY WARNINGS
A.
The guard provided with the tool must be securely attached to the
power tool and positioned for maximum safety, so the least amount of
wheel is exposed towards the operator. Position yourself and
bystanders away from the plane of the rotating wheel. The guard helps
to protect operator from broken wheel fragments and accidental contact
with wheel.
B.
Use only diamond or abrasive cut off wheels for your power tool. Just
because an accessory can be attached to your power tool, it does not
assure safe operation.
C.
The rated speed of the accessory must be at least equal to the
maximum speed marked on the power tool. Accessories running faster
than their rated speed can break and fly apart.
D.
Wheels must be used only for recommended applications. For example:
do not grind with the side of a cut-off wheel. Abrasive cut-off wheels
are intended for peripheral grinding, side forces applied to these wheels
may cause them to shatter.
E.
Always use undamaged wheel flanges that are of correct diameter for
your selected wheel. Proper wheel flanges support the wheel thus
reducing the possibility of wheel breakage.
F.
The outside diameter and the thickness of your accessory must be
within the capacity rating of your power tool. Incorrectly sized
accessories cannot be adequately guarded or controlled.
G.
The arbor size of wheels and flanges must properly fit the spindle of the
power tool. Wheels and flanges with arbor holes that do not match the
mounting hardware of the power tool will run out of balance, vibrate
excessively and may cause loss of control.
H.
Do not use damaged wheels. Before each use, inspect the wheels for
chips and cracks. If power tool or wheel is dropped, inspect for damage
or install an undamaged wheel. After inspecting and installing the
wheel, position yourself and bystanders away from the plane of the
rotating wheel and run the power tool at maximum no load speed for
