background image

INSTRUCTIONS MANUAL

MODEL 60701126

BENCH GRINDER

Please keep this instruction manual for future reference

MADE IN CHINA

Distributed By:

World Factory, Inc. ®

Southlake, Tx

1-888-422-7800

© 2002 World Factory, Inc.

®

Read the Instructions and Precautions before use of this product

IF YOU HAVE ANY PROBLEMS OR QUESTIONS CONCERNING THIS PRODUCT,

DO NOT RETURN IT TO YOUR RETAILER. CONTACT CUSTOMER SERVICE AT

1-888-422-7800

.

IF YOU HAVE ANY PROBLEMS OR QUESTIONS CONCERNING THIS PRODUCT,

DO NOT RETURN IT TO YOUR RETAILER. CONTACT CUSTOMER SERVICE AT

1-888-422-7800.

Technical data

Type

Input Voltage

Motor

No Load Speed
Arbor Diameter

Wheel Thickness
Bulb Type

60701126

120V ~ 60HZ

1/2 HP

3450 RPM

1/2" (12.7mm)

Wheel Diameter

6" (152mm)

3/4" (19mm)

40 watts Max. Type "A"

14" x 7-1/2" x 10"

Dimensions (L x W x H)

30 lbs

Net Weight

Power Glide Limited Warranty

Consumer Power Tools for Home Use

World  Factory,  Inc.®  (Seller)  warrants  to  the  original  Buyer  only,  that  each  POWER  GLIDE™  portable 
power tool will be free from defects in material and workmanship for a period of one (1) year from date of 
purchase.  SELLER’S SOLE OBLIGATION AND BUYER’S EXCLUSIVE REMEDY UNDER THIS LIMITED 
WARRANTY  SHALL  BE THE  REPAIR  OR  REPLACEMENT  OF  PARTS,  WITHOUT  CHARGE,  WHICH 
ARE DEFECTIVE IN MATERIAL OR WORKMANSHIP. 
 ANY PARTS AS DETERMINED BY THE SELLER 
WHICH  HAVE  BEEN  MISUSED; ABUSED  OR  DAMAGED  EITHER  DIRECTLY  OR  INDIRECTLY  FROM 
REPAIRS  OR  ALTERATIONS  ATTEMPTED  BY  UNAUTHORIZED  PERSONS;  IMPROPER 
MAINTENANCE,  NEGLECT  OR  ACCIDENT  ARE  NOT  COVERED  BY  THIS  LIMITED  WARRANTY.    To 
make a claim under this Limited Warranty, you must return the complete power tool, transportation prepaid, 
to any World Factory, Inc.® authorized service center. Call 1-888-422-7800 for the location of the nearest 
authorized power tool service center.

Additional Limitations

THIS  LIMITED  WARRANTY  DOES  NOT  APPLY  TO  ACCESSORY  ITEMS  SUCH  AS  CIRCULAR  SAW 
BLADES,  DRILL  BITS,  ROUTER  BITS,  JIGSAW  BLADES,  SANDING  BELTS  OR  PADS,  GRINDING 
WHEELS  AND  OTHER  RELATED  ITEMS.    ALL  IMPLIED  WARRANTIES  SHALL  BE  LIMITED  IN 
DURATION TO ONE (1) YEAR FROM DATE OF PURCHASE.  IN NO EVENT SHALL SELLER BE LIABLE 
FOR  ANY  INCIDENTAL  OR  CONSEQUENTIAL  DAMAGES,  INCLUDING  BUT  NOT  LIMITED  TO 
LIABILITY FOR LOSS OF PROFITS, ARISING FROM THE SALE OR USE OF THIS PRODUCT.  

If  any  provision  of  this  Limited  Warranty  is  for  any  reason  held  to  be  invalid  or  unenforceable,  such 
provision  shall  not  affect  any  other  provision  herein,  this  Limited  Warranty  shall  be  construed  as  if  such 
invalid and/or unenforceable provision had never been contained herein.

This  Warranty  contains  the  entire  agreement  between  Seller  and  Buyer  and  supersedes  any  and  all  prior 
agreements, arrangements, or understandings between the parties relating to product warranty.

Summary of Contents for 60701126

Page 1: ...IP ANY PARTS AS DETERMINED BY THE SELLER WHICH HAVE BEEN MISUSED ABUSED OR DAMAGED EITHER DIRECTLY OR INDIRECTLY FROM REPAIRS OR ALTERATIONS ATTEMPTED BY UNAUTHORIZED PERSONS IMPROPER MAINTENANCE NEGLECT OR ACCIDENT ARE NOT COVERED BY THIS LIMITED WARRANTY To make a claim under this Limited Warranty you must return the complete power tool transportation prepaid to any World Factory Inc authorized ...

Page 2: ...eration or Starting up of the Device Do not place your finger on the switch when carrying tools connected to the power supply Make sure that the switch is off when connecting the device to the power supply 12 Disconnect the Tool From the Power Supply When not in use prior to maintenance and during sand paper installation disconnect machine tools of all kinds from the power supply 13 Be Alert Obser...

Page 3: ... and use Grinding wheels can produce flying parks and other debris Always wear protective clothing and make sure sparks are directed away from operator others present or flammable materials Never use the side of grinding wheel use only the cutting edge Minimum Recommended Extension Cord Gauge AWG Chart Extension Cord Length 25 50 100 0 5 16 16 16 6 10 16 16 14 11 15 14 14 14 16 20 12 10 10 AMP Loa...

Page 4: ...or the left spark guard Installing Tool Rest Figure 1 1 Attach the right tool rests 1 to the wheel guard 2 with washers 3 and bolts 4 2 Adjust tool rest to within 1 16 of the grinding wheel or other accessory being used Tighten bolt 4 to secure 3 Repeat for the left tool rest PARTS HARDWARE LIST PART DESCRIPTION QUANTITY A 1 Base B 1 On Off Switch C 2 Tool Rest D 2 Eye Shield E 1 Light F 1 Light O...

Reviews: