background image

Safety with Gasoline - Powered Machines 

 

Gasoline is a highly flammable liquid. Gasoline also gives off flammable vapor that can be 

easily ignited and cause a fire or explosion. Never overlook the hazards of gasoline. Always 

follow these precautions: 

     Never run the engine in an enclosed area or without proper ventilation as the exhaust from the engine contains 

carbon monoxide, which is an odorless, tasteless, and a deadly poisonous gas. 

     Store all fuel and oil in containers specifically designed and approved for this purpose and keep away from heat and 

open flame, and out of the reach of children. 

      Replace rubber fuel lines and grommets when worn or damaged and after 5 years of use. 

     Fill the gasoline tank outdoors with the engine off and allow the engine to cool completely. Don't handle gasoline if 

you or anyone nearby is smoking, or if you're near anything that could cause it to ignite or explode. Reinstall the fuel 
tank cap and fuel container cap securely. 

     If you spill gasoline, do not attempt to start the engine. Move the machine away from the area of the spill and avoid 

creating any source of ignition until the gas vapors have dissipated. Wipe up any spilled fuel to prevent a fire hazard 
and properly dispose of the waste. 

     Allow the engine to cool completely before storing in any enclosure. Never store a machine that has gas in the tank, 

or a fuel container, near an open flame or spark such as a water heater, space heater, clothes dryer or furnace. 

     Never make adjustments or repairs with the engine running. Shut down the engine, disconnect the spark plug wire, 

keeping it away from the spark plug to prevent accidental starting, wait 5 minutes before making adjustments or 
repairs. 

     Never tamper with the engine’s governor setting. The governor controls the maximum safe operation speed and 

protects the engine. Over-speeding the engine is dangerous and will cause damage to the engine and to the other 
moving parts of the machine. If required, see your authorized dealer for engine governor adjustments. 

     Keep combustible substances away from the engine when it is hot. 

     Never cover the machine while the muffler is still hot. 

     Do not operate the engine with the air cleaner or the carburetor air intake cover removed. Removal of such parts 

could create a fire hazard. Do not use flammable solutions to clean the air filter. 

     The muffler and engine become very hot and can cause a severe burn; do not touch. 

 

 

 

 

 

 

 

Summary of Contents for PK0311















Reviews: