background image

Home Theater  Bypass

The Home Theater Bypass feature of the Soloist 3 Stereo Preamplifier allows the unit to
play direct 2-channel music or to be bypassed in a multi-channel home theater system.

The standard method to use this feature is to connect the Soloist 3 to the power amp and
music sources such as CD player, tuner, etc. The audio output of the home theater proces-
sor is then connected to the video inputs of the Soloist 3.

When the HT Bypass indicator (Front Panel of Soloist 3) is on, the video inputs are con-
nected directly to the unbalanced Main Outputs, bypassing the Soloist 3.

Specifications

The specifications for the Soloist 3 preamplifier are as follows:

Noise  . . . . . . . . . . . . . . . . . . . . . . . . . . . . .over 100 dB A weighted
Distortion  . . . . . . . . . . . . . . . . . . . . . . . . . .THD and IM less than 0.001%
Power Requirements  . . . . . . . . . . . . . . . . .100-120 VAC or 200-240 AC @ 50/60Hz
Inputs  . . . . . . . . . . . . . . . . . . . . . . . . . . . .(5 pair) unbalanced stereo inputs

 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .plus (1 pair) monitor input

Outputs  . . . . . . . . . . . . . . . . . . . . . . . . . . .(1 pair) unbalanced stereo main output
Input Impedance  . . . . . . . . . . . . . . . . . . . .50,000 ohms
Controls  . . . . . . . . . . . . . . . . . . . . . . . . . . .Volume and Balance
Remote Controls  . . . . . . . . . . . . . . . . . . . .Power On/Off, Mute, Volume, Input selection, 

 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .Monitor and Home Theateer Bypass

Frequency Response  . . . . . . . . . . . . . . . . .0.2 to 100,000 Hz within 3dB
Dimensions  . . . . . . . . . . . . . . . . . . . . . . . .12" W x 2" H x 8.5" D 

 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .(304.8 mm W x 50.8 mm H x 216 mm D)
 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .(excluding jacks, knobs, and feet)

Shipping Weight  . . . . . . . . . . . . . . . . . . . . .9 pounds (4.1 Kg)
Power Rating  . . . . . . . . . . . . . . . . . . . . . . .120 VAC 5 A Fuse (240 VAC available on 

 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .request)

Warranty  . . . . . . . . . . . . . . . . . . . . . . . . . .5 years

4

Summary of Contents for belles Soloist 3








Reviews: