down and lift the back high enough so that the wheels under
the front touch the ground. Roll the Power
BIKE
while holding the
back end off the ground.
Resistance
The resistance is applied by Eddy current. The resistance
is generated by using magnets which act on the fly wheel.
It may be adjusted with the resistance knob on the right
side of the handlebar column. To increase the resistance,
turn the knob away from you (clockwise - to the right).
To decrease the resistance, turn the knob towards you
(counter-clockwise - to the left)
Brakes
To stop or slow down use the break lever on the
handlebar shaft. To slow down or stop the bike press the
break lever downwards.flywheel.
If you need to move the power
BIKE
™ push the handlebar
How to move the Power
BIKE
6
7
