background image

 

POWX1751 

EN

 

Copyright © 2018 VARO 

P a g e

 | 

6

 

www.varo.com 

6  SPECIFIC SAFETY WARNINGS 

This symbol indicates warnings to be read before using the product so as 
to prevent injury to the user. 

Compressed air is a potentially dangerous form of energy; always take 
great care when using the compressor and its accessories. 

An  ACOUSTIC  PRESSURE  value  of  4  m.  corresponds  to  the  ACOUSTIC  POWER  value 
stated on the yellow label located on the compressor, minus 20 dB. 

6.1 

Do’s 

 

The compressor must be used in a suitable environment (well ventilated with an ambient 
temperature of b5°C and +40°C) and never in places affected by dust, acids, 
vapors, explosive or flammable gases. 

 

Always maintain a safety distance of at least 4 meters between the compressor and the 
work area. 

 

Any coloring of the compressor during painting operations indicates that the distance is 
too short. 

 

Insert the plug of the electric cable in a socket of suitable shape, voltage and frequency 
complying with current regulations. 

 

Use extension cables with a maximum length of 5 meters and of suitable cross-section. 

 

The use of extension cables of different length and also of adapters and multiple sockets 
should be avoided. 

 

Always use the switch I/O to switch off the compressor. 

 

Always use the handle to move the compressor. 

 

When operating, the compressor must be placed on a stable, horizontal surface. 

6.2 

Don’ts 

 

Never direct the jet of air towards persons, animals or your body. (Always wear safety 
goggles to protect your eyes against flying objects that may be lifted by the jet of air). 

 

Never direct the jet of liquids sprayed by tools connected to the compressor towards the 
compressor. 

 

Never use the appliance with bare feet or wet hands or feet. 

 

Never pull the power cable to disconnect the plug from the socket or to move the 
compressor. 

 

Never leave the appliance exposed to adverse weather conditions. 

 

Never transport the compressor with the receiver under pressure. 

 

Do not weld or machine the receiver. In the case of faults or rusting, replace the entire 
receiver. 

 

Never allow inexpert persons to use the compressor. Keep children and animals at a 
distance from the work area. 

 

This appliance is not intended for use by persons (including children) with reduced 
physical, sensory or mental capabilities, or lack of experience and knowledge, unless they 
have been given supervision or instruction concerning the use of the appliance by a 
person responsible for their safety.  

 

Children should be supervised to ensure that they do not play with the appliance. 

 

Do not position flammable or nylon/fabric objects closed to and/or on the compressor. 

 

Never clean the compressor with flammable liquids or solvents. Check that you have 
unplugged the compressor and clean with a damp cloth only. 

 

The compressor must be used only for air compression. Do not use the compressor for 
any other type of gas. 

Summary of Contents for 829580














Reviews: