POW4001
EN
Copyright © 2013 VARO
P a g e
|
6
www.varo.com
7.3
Collecting the dust
For a better dust extraction of the working surface, your sanding machine can be connected to
the ordinary vacuum cleaner for house-use.. Use the supplied dust extraction connector.
8
TECHNICAL DATA
Power rating
135W
Mains voltage
230V
Mains frequency
50Hz
Sanding surface
140 x 140 x 80mm
No load speed
13.000 min
-1
Safety class
II
9 NOISE
Noise emission values measured according to relevant standard. (K=3)
Acoustic pressure level LpA
80 dB(A)
Acoustic power level LwA
91 dB(A)
ATTENTION! Wear hearing protection when sound pressure is over 85
dB(A).
aw (Vibration):
6.3 m/s²
K = 1.5 m/s²
10 CLEANING AND MAINTENANCE
The machine does not require any special maintenance.
For safe and efficient working, always keep the machine and the ventilation slots clean.
Always be sure that the tool is switched off and unplugged before carrying out any work on
the tool.
11 SERVICE DEPARTMENT
Damaged switches must be replaced by our after-sales service department.
