POWC40200
EN
Copyright © 2021 VARO
P a g e
|
5
www.varo.com
7
DUST EXTRACTION
Dusts from materials such as lead-containing paint, some types of wood, minerals and metal
may be harmful to health. Touching or inhaling the dusts can cause allergic reactions and/or
ailments of the respiratory tract of the user or persons in the vicinity. Certain dusts such as oak
or beech dust are considered carcinogenic, particularly in combination with wood treatment
additives (chromate, wood preservatives). Materials containing asbestos may only be
processed by experts.
▪
Always use a dust extraction facility.
▪
Make sure the workplace is well ventilated.
▪
Always wear a dust protection mask.
▪
Observe the regulations valid in your country for the materials to be processed.
8
OPERATING INSTRUCTIONS
Do not sand plaster surfaces, (WARNING: In this case your guarantee
becomes void) this may clog the motor (brushes, ball bearings, ..).
8.1
Switching On-off
Press On-off switch I/O (2)
8.2
Attaching the sandpaper
▪
Select sandpaper with the correct grain size. Make sure the perforations in the paper
coincide with those on the sanding base plate.
▪
Then attach the sand paper to the sanding plate, using the hook-and-loop system of the
sand paper and the sanding plate.
▪
The sandpaper should rest flush on the base plate and must not come loose.
▪
You can be sure to find the right sandpaper among our product range (see technical
specifications).
For even a better dust extraction of the working surface, your sanding
machine can be connected to the ordinary vacuum cleaner for house-use
with a dust extraction connector.
9
TECHNICAL DATA
Power rating
130W
Mains voltage
220-240V
Mains frequency
50Hz
Sanding surface
140 x 140 x 80mm
No load speed
14.000 min
-1
Safety class
II
