POWX354
EN
Copyright © 2021 VARO
P a g e
|
4
www.varo.com
▪
If there are devices for connecting dust extraction and collection facilities, please ensure
that they are attached and used correctly. Using such devices can reduce dust-related
hazards.
4.4
Power tool use and care
▪
Do not expect the power tool to do more than it can. Use the correct power tool for what
you want to do. A power tool will achieve better results and be safer if used in the context
for which it was designed.
▪
Do not use the power tool if the switch cannot turn it on and off. A power tool with a broken
switch is dangerous and must be repaired.
▪
Disconnect the plug from the power source before making adjustments, changing
accessories, or storing power tools. Such preventive safety measures reduce the risk of
starting the power tool accidentally.
▪
Store power tools, when not in use, out of the reach of children and do not allow people
who are not familiar with the power tool or these instructions to operate it. Power tools are
potentially dangerous in the hands of untrained users.
▪
Maintenance. Check for misalignment or jammed moving parts, breakages or any other
feature that might affect the operation of the power tool. If it is damaged, the power tool
must be repaired. Many accidents are caused by using poorly maintained power tools.
▪
Keep cutting tools sharp and clean. Properly maintained cutting tools with sharp cutting
edges are less likely to jam and are easier to control.
▪
Use the power tool, accessories and cutting tools, etc., in accordance with these
instructions and in the manner intended for the particular type of power tool, taking into
account the working conditions and the work which needs to be done. Using a power tool
in ways for which it was not intended can lead to potentially hazardous situations.
4.5
Service
▪
Your power tool should be serviced by a qualified specialist using only standard spare
parts. This will ensure that it meets the required safety standards.
5 ADDITIONAL SAFETY INSTRUCTIONS
▪
NEVER SPRAY AT PERSONS - NEVER aim the nozzle at another person or animal.
Never allow the spray to come into direct contact with the skin.
▪
FLASH POINT - This spray gun must not be used for spraying flammable paints and
solvents with a flash point of less than 32 °C
▪
VENTILATION - Always make sure that there is adequate ventilation in the work area
when spraying.
▪
BASKET NOZZLE - Always keep the spray basket nozzle in place during use.
▪
CONSIDER WORK AREA ENVIRONMENT
– Do not use spray guns where there is a risk
of fire or explosion.
▪
BEWARE OF ANY HAZARD - Beware of any Hazard by the material being sprayed and
consult the markings on the container or the information sup- plied by the manufacturer.
▪
DO NOT SPRAY - Do not spray any material where the hazard is not known.
▪
USE EYE PROTECTION - Always use appropriate eye protection to keep hazardous
vapours or fumes out of the eyes.
▪
WEAR A MASK - Never operate a spray gun without wearing a face mask
▪
PROTECT YOUR EARS - Wear ear protectors if the sound pressure exceeds 85 dB(A).
▪
MAINTAIN YOUR TOOLS - Keep your spray gun
，
paint container and nozzles clean. Do
not clean with flammable liquids with a flash point less than 32 °C
。
Inspect the mains lead
periodically and if damaged have it replaced by a qualified person.
▪
NAKED FLAMES - Never spray near a naked flame or appliance pilot flame.
▪
SMOKING - Never smoke whilst spraying.
