19
TROUBLE SHOOTING
WARNING:
Read instruction manual first! Remove the battery before making adjustments
or assembling accessories.
The following form lists the common operating system with problem and solutions. Please read the form
carefully and follow it.
PROBLEMS
POSSIBLE CAUSES
SOLUTION
Motor fails to start when
switch trigger is
depressed.
Battery is not secure.
Battery is not charged.
To secure the battery pack, make sure
the latches on the top of the battery pack
snap into place.
Charge the battery pack according to the
instructions included with your model.
Line will not feed
Check spool
Replace spool
1. Check line is not tangled or jammed in
the spool.
2.Remove the line and replace the spool
of the line and ensure the mechanism is
clean.
Motor runs, but cutting
blades do not move.
Trimmer damaged.
Do not use string trimmer.
Call for technical service.
Poor cutting performance Check the cutting line
1. Check the cutting line is fully
extended.
If not:
2. Manually extend the line or stop and
start the trimmer until the line has
been extended to the line cutter.
3.Make smaller cuts, this is a light
duty trimmer.
4.Ensure line is fully extended.
Summary of Contents for DB2603
Page 2: ......
Page 20: ...20 EXPLODED VIEW PART LIST ...
Page 41: ...41 VUE ÉCLATÉE ...
Page 63: ...63 DESPIECE Y LISTA DE PIEZAS ...
