12
MAINTENANCE
WARNING:
In order to avoid personal injury and the risk of fire and electric shock, disconnect the
appliance from the power supply before adjusting, inspecting, or cleaning the blower.
WARNING:
All repairs, electrical or mechanical, should be attempted only by trained repairmen. Use only
identical replacement parts, any other may create a hazard. If the power plug is worn or
damaged in any way, have it replaced immediately.
CLEANING AND STORAGE
Disconnect the extension cord before performing any maintenance task or storing.
Store the tool, instruction manual and accessories in a secure, dry place. In this way you will always
have the information ready by hand.
Keep the tool’s air intake unclogged and clean at all times.
Remove dust and dirt regularly. Cleaning is best done with a rag or brush.
Never use caustic agents to clean plastic parts.
WARNING:
Do not use cleaning agents to clean the plastic parts of the tool. A mild detergent on a damp
cloth is recommended. Water must never come into contact with the tool.
TROUBLE SHOOTING
The following form lists the common operating system with problem and solutions. Please read the form
carefully and follow it.
WARNING:
Always unplug the power cord before performing any adjustments,
maintenance, or repairs to your electric blower.
PROBLEMS
POSSIBLE CAUSES
SOLUTION
Motor fails to start when
Switch is turned on.
1. Power cord is not plugged in or
connection is loose
2. Household circuit breaker is
tripped.
1.Plug in the power cord.
2.Check circuit breaker.
Unit will not blow
Blocked tube
Clear the blockage.
EXPLODED VIEW & PARTS LIST
