23
Programs 10 & 11: CLEANING
The Vegimat features two automatic
programs for cleaning. All you need is
some water and 1-2 drops of dish de-
tergent.
The "Cold" program heats the water to
lukewarm temperature and the "Hot"
program cleans intensively with about
65 degrees.
Step by step:
1.
Fill in around 0.5 liters of cold
water into the empty pot.
2.
Add 1-2 drops of dish detergent
into it. In no case more than
that, otherwise it produces too
much foam!
3.
Place the upper Vegimat part
onto the pot and turn it clockwi-
se until the connector in the
handle of the jug and the upper
part is safely closed.
Plug the power cord to the hand-
le of the jug and into the outlet.
A beep signals the correct
connection of device and jug.
4.
Now press the Menu button to
light up the lamp „Cold“ or
„Hot“. By repeatedly pressing
the Menu button, you can switch
through all programs.
5.
With the Start button, the auto-
matic program begins.
6.
Program end is signaled by a
continuous beep. Then immedia-
tely disconnect the power cord
from the wall outlet and also
from the device.
7.
Turn the upper part open and lift
the unit from the pot. Now rinse
the device carefully under run-
ning water.
TAKE CARE: Make sure not to
get any water at the top
(operating panel).
8.
Then take the pot and rinse it
well under running water. Make
sure the power connector on the
handle and the bottom (black)
does not get contact with water.
Rinse the pot inside only.
Done!
When "Cold" and when "Hot"?
The hot program has a longer runtime
and cleans very intense.
For time and energy-saving reasons, we
recommend that you use the intensive
cleaning about 1 x per month or every
10-15 preparations.
In the meantime, it is best to take the
normal cleaning program ("Cold").
Summary of Contents for Vegimat Professional
Page 1: ...1 Manual and Guarantee POWER SOJA Breitweg 34 6067 Absam Austria V 1 0 Vegimat Professional ...
Page 27: ...27 Notes ...
Page 30: ...30 Notes ...
Page 31: ...31 Notes ...