3 Installation
String PV Grid-tied Inverter PSiO-W3#1100VPVK Series
(100000-125000)
User Manual
26
The handle is an accessory. When transporting, they need to be installed to corresponding position and
tightened.
It is recommended that carry the inverter by at least 4 people and wear protective equipment such as
smash-proof shoes and gloves.
While handling, move the inverter carefully to avoid impact or fall.
During transporting, always pay attention to the gravity center of the inverter, do not suddenly
put it down or lift it up.
Putting the inverter directly on a hard ground will damage the terminals of the inverter or the case,
it is necessary to lay protective materials such as sponge pads or foam underneath it.
Ring transporting
Figure3-10
Ring transporting
The hoist ring is an optional accessory. When the hoist rings are required for transportation, they must
be selected first, and install them onto the top of the inverter tightly on the site.
