7 - English
WARNING:
If any parts are damaged or missing do not operate this
product until the parts are replaced. Use of this product
with damaged or missing parts could result in serious
personal injury.
WARNING:
Do not attempt to modify this product or create acces-
sories not recommended for use with this product. Any
such alteration or modification is misuse and could result
in a hazardous condition leading to possible serious
personal injury.
WARNING:
Do not connect to power supply until assembly is com-
plete. Failure to comply could result in accidental starting
and possible serious injury.
UNPACKING
This product has been shipped completely assembled.
Carefully remove the product and any accessories from
the box. Make sure that all items listed in the packing list
are included.
WARNING:
Do not use this product if it is not completely assembled
or if any parts appear to be missing or damaged. Use of
a product that is not properly and completely assembled
could result in serious personal injury.
Inspect the product carefully to make sure no breakage
or damage occurred during shipping.
Do not discard the packing material until you have care-
fully inspected and satisfactorily operated the product.
If any parts are damaged or missing, please call
1-877-617-3501 for assistance.
PACKING LIST
1/4 Sheet Sander
Sandpaper (3 sheets)
Dust Bag Assembly
Paper Punch
Tool Bag
Operator’s Manual
PRODUCT SPECIFICATIONS
Size of Paper .......................................................1/4 Sheet
Motion ..................................................................... Orbital
Orbital Diameter ..................................................... 1/16 in.
No Load Speed .................................. 14,000 r/min. (OPM)
Input .................................... 120 V, AC only, 60 Hz, 2 AMP
Net Weight ...............................................................3.3 lbs.
KNOW YOUR SANDER
See Figure 1
, page 12
.
The safe use of this product requires an understanding of
the information on the product and in this operator’s manual
as well
as a knowledge of the project you are attempting.
Before use of this product, familiarize yourself with all op-
erating features and safety rules.
DUST COLLECTION
Use either the dust bag included or attach a 1-1/4 in. vacuum
hose for dust collection.
PAPER CLAMP
The sander has two paper clamps designed to secure stan-
dard sandpaper to the cushion.
PAPER PUNCH
The sander is packed with a paper punch that can be used
to punch holes in sandpaper that will be attached to the
sheet sander. The punched holes allow sanded material to
pass through the sheet sander into the dust bag or through
a vacuum.
ON/OFF SLIDE SWITCH
The sander has a conveniently located sealed slide switch
to keep out dust for longer life.
FEATURES
ASSEMBLY
