Istruzioni per l’uso e manutenzione
Cod. OQ7.5ARG114 – GB
Emiss. 19-01-11 Rev. 0 - Agg. /
26
POWER SYSTEM SRL
Via dell’Emigrante, 11/13 - 36040 Brendola (VI) Italia
14
STORAGE
If for various reasons the compressor cannot be installed at the time of delivery and has to remain some time in storage, it must be
placed in a safe environment, with an adequate temperature and degree of humidity, and protected against dust.
THE CUSTOMER (EMPLOYER) MUST TAKE ALL NECESSARY STEPS TO ENSURE THAT HIS
EMPLOYEES CANNOT ACCESS THE PLACE OF INSTALLATION OF THE COMPRESSOR FOR ANY
REASON UNTIL IT HAS BEEN TESTED.
IT IS FORBIDDEN TO SWITCH ON THE COMPRESSOR UNTIL THE INSPECTION CERTIFICATE
HAS BEEN SIGNED.
THE SIGNING OF THE INSPECTION CERTIFICATE CONFIRMS THE CORRECT OPERATION OF
THE COMPRESSOR AND THE ABSENCE OF ANY VISIBLE DEFECTS.
THE MANUFACTURER DECLINES ALL RESPONSIBILITY FOR ANY CLAIMS CONCERNING THE
OPERATION OF THE COMPRESSOR, COMMUNICATED BY THE CUSTOMER AFTER THE
INSPECTION HAS BEEN CARRIED OUT.
N.B.: A COPY OF THE INSPECTION CERTIFICATE, FULLY COMPILED AND SIGNED, MUST BE
GIVEN TO THE MANUFACTURER’S INSPECTION TECHNICIAN.
