OPERATING PROCEDURES
OPERATING PROCEDURES
It is essential to be familiar with the correct
operating procedures.
The operator must have adequate training for
this type of platform.
The Nano SP requires approved certificated
training such as the IPAF 3A category training
for self-propelled vertical MEWPS. In addition
it is essential that the operator has specific
familiarisation handover training for the Nano
SP product.
The Nano SP is fitted with a lanyard attachment
point as standard. If the operator chooses to
wear a safety harness, an approved ‘fall restraint’
type harness should be worn.
Operating Procedures are divided into three
key areas:
1.
Pre-operation checks.
What to do before operating the Nano SP.
2.
Normal operation.
How to use the Nano SP safely.
3.
Emergency Operation.
How to lower the Nano SP without power
or in the event of operator incapacity.
6
Cage mount
gate latch
Pothole Mechanism
Mast Wear Screws
Cantilever Deck
Main Control Cable (Curly)
Basket
Gas Strut
Powerpack
Oil Filler Cap
Batteries
Battery Charger
Pothole Mechanism Plunger
Safety Prop
Do not operate until inspection and functional checks have been performed as specified below:
