ENGLISH
CONTENTS:
• (2) 1100mAh Rechargeable Batteries
• Charge-thru Battery Doors
(2)
‘A’ for Xbox One
and (2)
‘B’ for Xbox Series X
• 10 ft (3m) USB Charge Cable
• User Manual
USE:
1. Install the Rechargeable Battery into the battery
compartment of your Xbox Wireless Controller.
2. Attach the correct Charge-thru Battery Door to the back
of the Xbox Wireless Controller after checking underside of
door:
‘A’ for Xbox One and ‘B’ for Xbox Series X.
3. Attach the Charge-thru Battery Door to your controller.
4. Connect USB cable to battery and the Xbox.
5. Check LED color for charge status; Amber while
charging and White once fully charged.
Note: For battery charge level, check Xbox on-screen
display. Battery can also be charged when not installed
to controller. Controller remains functional when
charging while battery is installed.
CHARGING:
• Only use original/included USB Charging Cable.
• Do not connect USB Charge Cable to any USB AC adapters.
• Do not charge your 1100mAh Rechargeable Batteries
on flammable surfaces i.e. mattresses, couches, and or
other flammable materials.
• Do not leave batteries unattended for long periods of time.
• Do not cover your controller while charging with any
blankets, pillows, bedding, etc.
• Ensure proper ventilation.
WARNING - BATTERY LEAKAGE
Leakage of ingredients contained within the battery
pack, or the combustion of product ingredients, can
cause personal injury as well as damage to game
controller. Avoid contact with skin. If contact occurs,
immediately wash thoroughly with soap and water. If
liquid leaking from a battery pack comes into contact
with your eyes, immediately flush thoroughly with water
and contact a medical professional for assistance.
BATTERY WARNING:
Do not attempt to replace the rechargeable battery
yourself- you may damage the battery, which could
cause overheating, fire, and injury. The Lithium-ion
battery in your device should be serviced or recycled
by PowerA or an authorized provider and must be
recycled or disposed of separately from household
waste. Dispose of batteries according to your local
environment laws and guidelines. Do not use or leave the
product containing rechargeable batteries exposed to
very high temperature (e.g. at strong direct sunlight or
in a vehicle in extremely hot weather). Otherwise, it can
overheat, catch fire, or the performance will degenerate,
and the service life will be shortened. Do not use the
rechargeable battery item in a location where static
electricity is rich, otherwise, the internal safety devices
may be damaged, causing a harmful situation. In case
the electrolyte gets into the eyes due to the leakage
of battery, do not rub eyes! Rinse eyes with clean
running water and seek medical attention immediately.
Otherwise, it may injure eyes or cause a loss of sight.
If the battery gives off an odor, generates heat, or in
any way appears abnormal during use, recharging or
storage, immediately remove it from battery charger and
place it in a sealed vessel such as a metal box. Be aware
discarded batteries may cause fire, do not heat the
controller or throw it into fire.
TROUBLESHOOTING
Q1: The Play and Charge Kit Rechargeable Battery is
not charging.
A1: The Rechargeable Battery needs a powered USB
source to charge. Confirm that your Xbox is powered ON.
A2: Confirm the USB Charge Cable is connected to the
Rechargeable Battery and/or the Xbox correctly.
A3: Confirm the Rechargeable Battery and Charge-thru
Battery Door is installed correctly.
Q2: The Play and Charge Kit Rechargeable Battery is not
charging on the PowerA Charging Stand or Charging Station.
A1. Confirm the Xbox Wireless Controller is placed on the
PowerA Charging Stand or Charging Station correctly.
A2: Confirm the Charging Stand or Charging Station is
properly connected to a powered USB port.
A3: Confirm the Charging Stand or Charging Station
charge cradle is pushed down in the charge position.
A4: If using the PowerA Charging Station, confirm it is
properly connected to an AC Powered wall outlet.
SUPPORT
For support with your PowerA accessories, please visit
PowerA.com/Support
REGIONAL COMPLIANCE SYMBOLS
More information available via web-search of each
symbol name.
The WEEE symbol informs the end-user about
separate disposal requirements for WEEE (Waste
of electrical and electronic equipment) as required
per the Article 11(2) of the WEEE Directive and
prescribed by European standard EN50419:2005.
CE (Conformité Européene aka European
Conformity) is a certification mark that indicates
conformity with health, safety, and environmental
protection standards for products sold within the
European Economic Area.
The Regulatory Compliance Mark is a visible
indication of a product’s compliance with all
applicable ACMA (Australian Communications
and Media Authority) regulatory arrangements,
including all technical and record-keeping
requirements regarding the electrical safety and/
or electromagnetic compatibility (EMC).
FCC STATEMENT
This device complies with Part 15 of the FCC Rules.
Operation is subject to the following two conditions:
(1) this device may not cause harmful interference, and
(2) this device must accept any interference received,
including interference that may cause undesired
operation. Warning: Changes or modifications to this
unit not expressly approved by the party responsible for
compliance could void the user’s authority to operate the
equipment. Note: This equipment has been tested and
found to comply with the limits for Class B digital device,
pursuant to Part 15 of the FCC Rules.
These limits are designed to provide reasonable
protection against harmful interference in a residential
installation. This equipment generates, uses and can
radiate radio frequency energy and, if not installed and
used in accordance with the instructions, may cause
harmful interference to radio communications. However,
there is no guarantee that interference will not occur in
a particular installation. If this equipment does cause
harmful interference to radio or television reception,
which can be determined by turning the equipment
off and on, the user is encouraged to try to correct the
interference by One or more of the following measures:
• Reorient or relocate the receiving antenna
• Increase the separation between the equipment and
receiver
• Connect the equipment into an outlet on a circuit
different from that to which the receiver is connected
• Consult the dealer or an experienced radio/ TV
technician for help.
CAN ICES-3(B)/NMB-3(B):
This device complies with Industry Canada Iicense
exempt RSS standard(s). Operation is subject to the
following two conditions: (1) This device may not cause
interference, and (2) this device must accept any
interference, including interference that may cause
undesired operation of the device.
AUSTRALIAN WARRANTY STATEMENT:
This product comes with guarantees that cannot be
excluded under the Australian Consumer Law. You
are entitled to a replacement or refund for a major
failure and for compensation for any other reasonably
foreseeable loss or damage. You are also entitled to have
the goods repaired or replaced if the goods fail to be
of acceptable quality and the failure does not amount
to a major failure. If purchased within Australia or New
Zealand, this product comes with a One-year warranty
from date of purchase. Defects in the product must
have appeared within One year from date of purchase,
in order to claim the warranty. All warranty claims must
be facilitated back through the retailer of purchase
in accordance with the retailer’s return policies and
procedures. Any expenses incurred, as a result of
returning the product to the retailer of purchase are the
full responsibility of the consumer.
AU WHOLESALE DISTRIBUTOR:
Level 2, 2 Darling Street South Yarra, Australia VIC 3141
bluemouth.com.au Email: support@bluemouth.com.au
+61 (3) 9867 2666
MANUFACTURED BY:
Bensussen Deutsch & Associates, LLC. (BDA, LLC.)
15525 Woodinville-Redmond Rd.
NE Woodinville, WA 98072
BDAINC.com | POWERA.com
ADDITIONAL LEGAL
PowerA, and the PowerA logo are trademarks of
Bensussen Deutsch and Associates, LLC. TM and ©
Bensussen Deutsch and Associates, LLC. Microsoft,
CONNECT USB CABLE
TO BATTERY AND XBOX
INSTALL THE RECHARGEABLE BATTERY
INTO THE BATTERY COMPARTMENT
ATTACH THE MATCHING
CHARGE-THRU BATTERY DOOR
Customer Service
Service client
Kundendienst
Servicio a clientes
Assistenza clienti
Apoio ao Cliente
USER MANUAL
Manuel de l’utilisateur
Bedienungsanleitung
Manual de usuario
Manuale per l’uso
Manual do usuário
BDA, LLC.
15525 Woodinville-Redmond Rd NE
Woodinville, WA 98072
PLAY
AND
CHARGE
KIT
Two year limited warranty
For warranty details or support with your authentic PowerA accessories, please visit PowerA.com/Support.
Beschränkte 2-Jahre-Garantie Informationen zur Garantie oder Unterstützung zu Ihrem PowerA-Originalzubehör
finden Sie unter PowerA.com/Support.
Garantía limitada de dos años Si quieres más información sobre la garantía o necesitas ayuda con tus accesorios
originales de PowerA, visita PowerA.com/Support.
Garantie limitée de deux ans Pour plus de détails sur la garantie ou pour obtenir une assistance pour vos acces-
soires PowerA d’origine, veuillez consulter le site PowerA.com/Support.
Garanzia limitata di due anni Per i dettagli sulla garanzia o per richiedere assistenza per i tuoi accessori PowerA
autentici, visita la pagina PowerA.com/Support.
Garantia limitada de dois anos Para mais informações sobre a garantia ou os acessórios originais da PowerA,
visita PowerA.com/Support.
B
XBOX
SERIES X
A
XBOX
ONE
