16
11: Bypass enable/disable when UPS is off
Interface
Setting
ENA: Bypass mode is enabled when UPS is off
DIS: Bypass mode is disabled when UPS is off (Default)
12: Autonomy limitation setting
Interface
Setting
1-999: setting the backup time in minutes from 1-999 for
output outlets on battery mode.
DIS: The backup time setting will be disabled. (Default)
00: Exit setting
3-6. Operating Mode Description
Operating mode Description
LCD display
Standby mode
UPS is powered off and no output supply
power, but still can charge batteries.
Online mode
When the input voltage is within
acceptable range, UPS will provide pure
and stable AC power to output. The UPS
will also charge the battery at online
mode.
ECO mode
Energy saving mode:
When the input voltage is within voltage
regulation range, UPS will bypass
voltage to output for energy saving.
Converter mode When input frequency is within 40 Hz to
70 Hz, the UPS can be set at a constant
output frequency, 50 Hz or 60 Hz. The
UPS will still charge battery under this
mode.
