7
●
Pay highly attention to the rated battery voltage marked on the rear panel. If you want to change the
numbers of the battery pack, please make sure you modify the setting simultaneously. The connection
with wrong battery voltage may cause permanent damage of the UPS. Make sure the voltage of the
battery pack is correct.
●
Pay highly attention to the polarity marking on external battery terminal block, and make sure the
correct battery polarity is connected. Wrong connection may cause permanent damage of the UPS.
●
Make sure the protective earth ground wiring is correct.
The current spec, color, position, connection
and conductance reliability of wire should be checked carefully.
●
Make sure the utility input & output wiring is correct.
The current spec, color, position, connection and
conductance reliability of wire should be checked carefully. Make sure the L/N terminal is correct, not
reverse or short-circuited.
2-3. Software Installation
For optimal computer system protection, install UPS monitoring software to fully configure UPS shutdown.
Please insert the provided CD into CD-ROM to install the monitoring software.
