Electric Grass Trimmer
ORIGINAL INSTRUCTIONS
Electric Grass Trimmer
1. Never use water or chemical cleaners to
clean your power tool. Wipe clean with a dry
cloth.
2. Always check the cutting head and guard
before each use.
3. Always store your power tool in a dry place.
4. Keep the motor ventilation slots clean.
5. Have the unit professionally repaired should
any damage parts.
Tool runs slowly
If the trimmer is not cutting properly
Fig.K1
If a fault is suspected return the trimmer to
an authorized dealer for repair.
Although your new grass trimmer is really
easy to operate. If you do experience
problems, check the following:
TROUBLE SHOOTING
MAINTENANCE AND
STORAGE
Your trimmer is designed to use only line with
a maximum diameter of 1.2mm.
IMPROTANT:
Leave approximately 100mm of line unwound
and place into cleat.
Care should be taken to ensure that the line is
neatly coiled on the spool. Failure to do so will
impair the efficiency of the automatic line feed.
(See Fig. K1 K2 K3)
● Check that the spool housing can rotate freely.
Carefully clean it if necessary.
● Check that the cutting line does not protrude
more than 9 cm from the spool housing. If it
does, cut it off so that it just reaches the line
trimming blade.
Check the condition of the cutting head, if the
cutting line is too short or cutting head damaged.
Note: Do not use damaged cutting head.
WARNING!
Before proceeding, unplug the tool.
Then fit spool as described in “To fit spool
and line complete”.
Fig.K2
Fig.K3
ORIGINAL INSTRUCTIONS
Model No.
Rated voltage
Input power
No load speed
Cutting Width
TECHINICAL DATA
NOISE AND VIBRATION DATA
N1F-GT-240/250-B
230-240V AC 50Hz
250W
12000rpm
240MM
Cutting line Diameter
Protection class
Machine Weight
1.2mm
II
2.1kg
Sound pressure level(LpA)
Power sound level(LwA)
Vibrations
88dB(A), K
PA
: 1,5dB(A)
2,7m/s
2
, K: 1,5m/s
2
95dB(A)
