RGB LED CONTROLLER
INSTALLATION AND OPERATION
• You can use the remote turn on lead from your radio to trigger a relay. However do not connect your RGB
RF Receiver to the head unit Remote wire as this pulls more current than a typical turn on circuit provides.
• You can also use a rocker style switch to turn the receiver on and off. If your boat comes equipped with
a radio power rocker switch you can use this as your power source as well.
**Do not install the RGB RF receiver in enclosed metal, as this may interfere with connectivity
between it and the remote controller.
If you do not want to use a remote control and only want to display a single color this can easily be done by
connecting the BLACK wire in the 4-wire RGB cable to +12V Power and then connecting the following wire
to ground to illuminate the corresponding color.
**You will need to connect the BLACK +12V power to switched power either with a relay or switch to prevent
battery discharge when using single color mode.
COLOR COMBINATIONS:
RED
RED
GREEN
GREEN
BLUE
BLUE
RED/GREEN
BRIGHT GREEN
RED/BLUE
MAGENTA
BLUE/GREEN AQUA
RED/BLUE/GREEN
WHITE w/ Blue Tint
11
Summary of Contents for XL-POD10LR
Page 2: ......
