6
HOW TO USE YOUR POWERBOARD
For your safety it is recommended to wear protective gear such as a helmet, elbow pads,
knee pads, etc, when operating the POWERBOARD.
The power button is located next to the charging port on the POWERBOARD. Press it until
you hear the POWERBOARD beep to turn it on or off.
When riding the POWERBOARD wear comfortable, non-restrictive clothing and athletic shoes
with a closed toe. Clothing should not be so loose that a garment may be caught on a passing
object or in the wheels; this could result in loss of control and personal injury.
When standing on the POWERBOARD keep feet shoulder width apart. Do not stand
on the center portion of the POWERBOARD. Keep a relaxed, upright posture with your
knees slightly bent.
The range of the POWERBOARD is dependent upon the way you use it. The battery will run
out more quickly if you ride at higher speeds and/or up or down an incline.
GETTING ON AND OFF THE POWERBOARD
The POWERBOARD works in both directions, there is no correct front or back of the unit.
IMPORTANT: Be careful getting on and off the POWERBOARD and use stable objects for
assistance when learning to get on and off. Always step forward when getting on the
POWERBOARD and step backward when getting off the POWERBOARD, getting on or off the
POWERBOARD in any other manner may result in a fall and personal injury.
Getting ON the POWERBOARD:
1. Place the POWERBOARD on level ground in front of you.
2.
Turn the POWERBOARD on and make sure the Battery Level Light is green (indicating
the unit is charged).
3. Using your dominant foot step forward and place your foot lightly onto the POWERBOARD.
4.
Stabilize the POWERBOARD by finding the correct balance with your dominant foot.
5.
Once you have stabilized the POWERBOARD begin to shift your weight to your domi
-
nant foot and quickly bring your other foot onto the POWERBOARD.
6.
Stabilize yourself.
Getting OFF the POWERBOARD:
1. Bring the POWERBOARD to a complete stop.
2.
Using your dominant foot, angle your toes slightly downward to prevent the POWER
-
BOARD from moving backward.
3.
Quickly step backward with your non dominant foot and place your foot on the ground.
4.
Once you have stable footing on the ground take your dominant foot off the POWER
-
BOARD. You should now be safely on stable ground.
Summary of Contents for UL 2272 series
Page 1: ...1...
