PowerBoss, Inc. Copyright 2010
Admiral 38C Scrubber PB# 4100055UM Rev.* 08/10
Page 18
Starting Up
Ensure that the contact surfaces
(Fig. 6/2) are clean. Clean them
thoroughly, if ne essary, before
fitting them on the brush holder
(Fig. 6/4).
8. Slide the locking lever (Fig. 5/1) to
the middle of the device and hold
it there.
9. Mount the brush holder (Fig. 6/4)
on the rotary brush (Fig. 6/3), press
against the housing (Fig. 6/1) and
then slide upwards.
10. Pivot the locking lever (Fig. 5/1)
back under the brush holder (Fig.
6/4) to the stop.
11. Close the deflector (Fig. 4/1):
Take hold of the grip (Fig. 4/3),
raise the deflector (Fig. 4/1), pivot
to the device and lower into the de-
flector lock (Fig. 4/2). The deflec-
tor (Fig. 4/1) is now in its working
position.
