Page 12
PowerBoss
®
3 Operation
3.1 Method Of Operation
General
The E26 is a vacuum scrubbing
machine for wet cleaning of hard surfaced
fl oors.
3.1.1 Scrub Head Assembly
Lower the scrub head assembly (Fig. 3/1) via pedal
before scrubbing. The brushes will rotate
and the water supply turns on automatically.
When the forward/reverse lever is in the neutral
position & machine is stopped, the scrub brushes &
water supply is switch off automatically.
Figure 3 represents the Disc scrub Head type
machine.
A Cylindrical Scrub Head machine is also available.
3.1.2 Clean Water Tank
Fill the clean water tank (Fig. 3/2) after
folding up the opening. The clean water
tank holds approximatly19 gal. and the fi lling level
can be seen looking through the transparent
hose. Regulation of water amount is available via
adjustment handle.
Fig.3