background image

1 YEAR LIMITED WARRANTY

ALLTRADE TOOLS LLC AIR COMPRESSORS

Express and Exclusive Limited Warranty to Original Retail Buyer
Alltrade Tools LLC (hereinafter “Alltrade”) expressly warrants to the original retail purchaser of 

the accompanying air compressor and no one else all parts of the product (except those parts 

referred to below which are specifically excluded from such warranty (see Exclusions)) to be 

free from defects in materials and workmanship during the following periods from the original 

date of purchase: 

For one (1) year from the date of purchase:

• Compressor Pump 

• Tank assembly

• Plumbing 

For six (6) months from date of original purchase:

• Pressure Switch 

• Regulator

• Pilot Valve 

• Check Valve

• Copper/Stainless Steel Line
 

For ninety (90) days from the original date of purchase:

 

• Pressure Gauge 

• Safety Release Valves

• Drain Valve 

• Quick Couplers

For thirty (30) days from the original date of purchase:

• Air Accessories
The date of purchase shall be the date of shipment to the original purchaser, or the date the 

original purchaser took possession, custody or control of the product, whichever occurred 

first. This warranty shall be null and void if the product or any component thereof is modi-

fied or altered. This warranty does not apply to any other product and/or component thereof 

manufactured or distributed by Alltrade, and does not apply to products and/or components 

thereof designed, manufactured and/or assembled by others, for which Alltrade makes no 

warranties whatsoever. 

THERE ARE NO WARRANTIES WHICH EXTEND BEYOND THE 

DESCRIPTION ON THE FACE HEREOF

.

Warranty Performance 

By purchasing the product, purchaser expressly acknowledges and agrees that their sole and 

exclusive remedy under this warranty shall be strictly limited to the repair or replacement of 

any covered nonconforming items or parts thereof provided that any such nonconforming item 

and/or part is promptly returned to Alltrade’s facility postage pre-paid and insured (ADDRESS: 

ALLTRADE WARRANTY CLAIMS & REPAIR, 9250 RED ROCK ROAD, SUITE B, RENO, NV 

89508, ATTN: CUSTOMER SERVICE #1-800-423-3598).) within the applicable warranty peri-

od, with a written request by purchaser that Alltrade repair and/or replace the nonconforming 

item and/or part. We recommend that you keep the original product packaging in the event 

you need to ship the unit. We suggest the package be insured against loss or in transit dam-

age. When sending your product include your name, address, phone number, dated proof of 

purchase (or copy), and a statement about the nature of problem. Warranty coverage is condi-

27

Summary of Contents for 240039

































Reviews: