12
4.3 “FAULT” (continuous alarm):
Here is listing some “FAULT” conditions as
following for reference.
4.3.1
ALL LED flashing:
The UPS emits continuous beeps and the “FAULT” illuminates when UPS fails.
4.3.2
Overload indicator:
When the UPS is working under overload condition (the connected loads exceed the
maximum rated capacity), the UPS will emit continuous alarm to warn an overload
condition. In order to protect the unit and the loads, the UPS will be automatic
shutdown. Disconnect nonessential devices from UPS to eliminate the overload alarm.
5.
S
OFTWARE AND
I
NTERFACE
P
ORT
5.1 Power Monitoring Software
The UPSMON Pro software (or the other power monitoring software) is applied standard
RS-232 or USB interface to perform monitoring functions, and then provides an orderly
shutdown of a computer in the event of power failure. Moreover, UPSMON Pro displays all the
diagnostic symptoms on monitors, such as voltage, frequency and battery level and so on. For
UPS with RS-232 and USB communication port, the software is available for Windows
XP/2000/Vista/7/8 Server 2003/2008/2012 or later, Linux and others. Call your dealer for more
information on computer OS compatible solutions.
5.2 Interface Kits
A series of interface kits is available for operation systems that provide UPS monitoring. Each
interface kit includes the special interface cable required to convert status signals from the UPS
into signals which individual operating system recognizes. The interface cable at UPS side must
be connected to REMOTE PORT; at computer side can be either series port or USB port. The
other installation instructions and powerful features please refer to READ.ME file.
5.3 The characteristics of computer interface port
The computer interface port has the following characteristics:
The communication port on the back of the UPS may be connected to host computer. This port
allows the computer to monitor the status of the UPS and control the operation of the UPS in
some cases. Its major functions normally include some or all of the following:
To pop-up a warning message when power fails.
To backup opened files before operating system shutdown.
To turn off the UPS.
Some computers are equipped with a special connector to link with the communication port.
In addition, special plug-in cord may be needed. Some computers may need special UPS
monitoring software. Contact your dealer for the details on the various interface Kits.
