4
S
AVE THESE INSTRUCTIONS
Please read and save this manual!
Thank you for selecting this uninterruptible power system (UPS). It provides you with a perfect
protection for connected equipment. The manual is a guide to install and use the UPS. It includes
important safety instructions for operation and correct installation of the UPS. If you should have any
problems with the UPS, please refer to this manual before calling customer service.
Please save or recycle the packaging materials!
The UPS‘s shipping materials are designed with great care to provide protection within delivery. These
materials are invaluable if you ever have to return the UPS for service. Damage happened during
transit is not covered under the warranty.
Intelligent microprocessor control
The product is an advanced line-interactive UPS based on microprocessor control. This means that it
operates with the newest technology, high performance and powerful function.
The line-interactive UPS is an intelligent protector and provides pure, reliable AC power to the critical
loads - protecting them from utility power blackout, swells, sags, surges and interference. The loads
could include sensitively medical instruments, computers, telecommunication systems, and
industrially automatic equipment. Under power normal condition, the line-interactive design enables
the system to adjust and filter power fluctuations continuously and automatically. In the event of
power failure, it can provide immediately backup power from the batteries without any interruption.
Complete transference will be achieved within 4m seconds, with no interruption.
Beside this, when the utility power is connected, the charger would work automatically even under
power switch is OFF. Furthermore, in order to save the battery energy, UPS can automatically turn it
off under backup mode if none of the connected loads is operating.
Battery management
The visual and audible indications of the UPS present the battery’s status including capacity degree
and battery condition. Self-test function let UPS detect a weak battery before it is put into service. The
UPS normally perform a self-test at power up and manual self-test condition. Self-test function can be
conducted manually with the ON/TEST switch at any time.
Monitoring software
The line-interactive UPS and UPSMON Pro monitoring software make your computer operate
intelligent and provide you with the ability of perfect protection of your critical devices. The software
is available for most operation systems and is supplied with a communication cable that connects to
the UPS.
Note: There is no guarantee that interference to radio/TV will not occur in a particular installation. If
this UPS causes interference to radio or television reception, which can be determined by turning the
UPS off and on, the user is encouraged to try to correct the interference by one or more of following
measures:
1.
Connect the equipment to an outlet at a circuit different from the connected radio/TV.
2.
Increase the separation between the equipment and the receiver or reorient the receiving
antenna.
