1 of 10
3 Pin Schuko Converter Plug Technical Data & Fitting Instructions
Description
The 3 Pin Schuko Converter Plug (SCP3) is an adapter that converts the European IEC 60083:1975
Standard C 2b, C4, C5, and C6 plug to the BS l363 system format. The plug is designed and
manufactured to meet the requirements of BS 1363-5. It complies fully with the LVD and Plug and
Socket safety regulations. The design of the clamping method ensures the body of the European IEC
60083:1975 Standard C 2b, C4, C5, and C6 plug is enclosed.
Classification
-
Adapter, Single portable,
-
Re-wireable plug,
-
Fused,
-
Normal use,
-
Converts European IEC 60083:1975 Standard C 2b, C4, C5, and C6 plug to the BS l363 format.
-
Suitable for Class 1 and 2 devices (earthed and unearthed).
-
Not Suitable for any other plug system.
Certification
-
BSi Kitemark KM 23223
Relevant Standards
-
BS 1363-5 — Conversion plug
BS 1362 — Fuse link
Rating
-
Voltage
240V ac
-
Current
13 amps max,
-
Load
3000 watts max.
-
Frequency
50 Hz
-
Environmental Protection
IP 3X (STD BS1363 accessory rating).
-
Fuse
13 amp BS 1362.
-
Flammability
V2 (external Casing)
-
Mechanical Strength
1000 grams @ 500mm
-
Colour
Black or White
-
Weight
60 grams typical
-
Finish
Plain and fine sparkle
-
Retaining Screw
Plain or Tamperproof
Note: - Tolerance as per relevant British Standard
Safety Design Features
-
Double mechanical interlocks to prevent the SCP3 from being inserted into the socket outlet
without the cover and retaining screws being properly secured.
-
Hinged cover
-
External fuse access, opening of SCP3 not required
-
No loose parts
-
Plug features designed to meet the requirements of BS1363.
-
Meets the requirements of the DTI Plug and Socket regulations.
Note: The SCP3 should be used with double pole protected appliances only
Installation System
The 3 Pin Schuko Converter Plug (SCP3) is designed for use within the BS1363 Plug and Socket
system only, as defined by the IEE Wiring Regulations BS 7671
Summary of Contents for SCP3
Page 4: ...4 of 10 Diagram 2 Get plug and install in to clips and close lid aligning clips see diagram 3 ...
Page 5: ...5 of 10 Diagram 3 Close lid Ensure clips C and D align and click home see diagram 4 C D ...
Page 8: ...8 of 10 Diagram 2 Get plug and install in to clips and close lid aligning clips see diagram 3 ...
Page 9: ...9 of 10 Diagram 3 Close lid Ensure clips C and D align and click home see diagram 4 C D ...
