Page 2 of 3
2. Red light flashes when transmitting files; flash stops and red light on after the process is
completed.
3. Green light blinks when playing music.
4. In low battery mode, red light blinks. It takes 5 to 10 minutes for the music player to shut down
automatically.
5. When the music player is being closed or is being connected to the computer, red light and green
light will blink alternatively for seconds.
V.
Operation Instruction
1.
Start/Pause/Close
(1)
Press and hold “PLAY” key. In 2 seconds, the two indicating lights on both sides will turn on
concurrently. Then you will hear a “Di” sound, which indicates that you have entered playing
mode. The green light wills blinks slowly.
(2)
In playing mode, press “PLAY” once to pause playing music and press again to re-start it.
(3)
In case music playing is paused for more than 10 minutes, the MP3 player will shut down
automatically.
2.
Stop/turn off Power Supply
Press and hold “PLAY” to stop playing and turn off power supply at the same time. In addition,
When all music’s playing finished it will shut down automatically.
3.
Track selection
When playing music, press “FF/VOL+” to jump to the next track; press “REW/VOL-“ to back to
the previous track.
4.
When playing music, press and hold “FF/VOL+” to increase music volume; press and hold
“REW/VOL-“ to decrease music volume.
5.
EQ Mode
You can select 5 EQ musical modes, namely: Normal, Pop, Classic, Rock and Jazz. Press “EQ” to
select the mode you like and the player will rotationally switch them one by one.
6.
Memory function
If the player is closed properly, it will save the playing conditions including volume, EQ mode and
the track being played immediately before the closure. When it is opened again, it will extract the
memory and play the track with the playing conditions like volume and EQ mode the same as those
immediately before the closure.
VI.
Driver Installation
1.
No driver installation is needed if the operating system is WinME/2000 or above.
2.
Driver installation on Win 98 interface
(1)
Connect the MP3 player with the computer through its USB port; the PC will indicate that a
new hardware device is found.
(2)
Complete the driver installation as directed by the PC
(3)
When the installation is completed, double click “My Computer” and you will find a “Portable
