12
13
01M device. These give you the option
to choose the right cable to reach the
muscle group you’re targeting, depending
on your physical measurements.
ELECTRODE PADS , :
PowerDot PD-01M uses two types of
electrode pads – one 9x5 cm (3.5"x2")
rectangular pad (7) and a pair of 5.5 cm
(2.1") round pads (8). The rectangular pad
also acts as a holder for the PowerDot
device itself.
PowerDot pads use unique skin
biocompatible hydrogel with superb
conductive qualities and adhesiveness.
The lifetime of the PowerDot pads
depends a lot on your individual skin
properties, level of hairlessness and the
quality of maintenance. On average,
each pad lasts for around 25 stimulation
sessions. After that, adhesiveness and
conductive properties of the pads may
start deteriorating.
Store your pads inside
the safety film, in a dry
environment (either in the
original zipper plastic bag
or inside the PowerDot
carry case). Make sure you
attach the pads to clean
and dry skin!
DIRECTIONS
FOR USE
INSTALLING / LAUNCHING
THE POWERDOT MOBILE
APPLICATION
1) Make sure your mobile device a) runs
on Android OS 5.0 Lollipop or later, and
b) is Bluetooth Smart Ready-enabled.
2) Click on the Google Play application,
search for the “PowerDot” Mobile
Application and install it.
3) Launch the installed PowerDot
application, walk through the on-screen
Safety Briefing, then follow instructions
to locate and activate your PowerDot (or
PowerDots) for the first use.
1) Make sure your mobile phone a) runs on
iOS 8.0 or later, and b) is iPhone 5 or later.
2) Launch Apple App Store application,
search for the “PowerDot” Mobile
Application and install it.
3) Launch the installed PowerDot
application, walk through the on-screen
Safety Briefing, then follow instructions
to locate and activate your PowerDot (or
PowerDots) for the first use.
TURNING POWERDOT ON/OFF
To turn on your PowerDot PD-01M device,
hold down the Multifunction Button for
approximately 1 second, until you see the
power light turn on. When PowerDot is
not in stimulation, you can turn it off
by pressing the Multifunction Button.
When a stmulation is ongoing, click
the Multifunction Button once to stop/
suspend the stimulation and then hold
the Multifunction Button to turn off the
PowerDot.
ACTIVATING POWERDOT
Before PowerDot PD-01M can be used for
muscle stimulation, it must be activated
from within your PowerDot Mobile
Application.
When PowerDot is activated, it gets
paired with your mobile phone securely.
Neither you nor anyone else will be able
to connect and use your PowerDot from
any other mobile phone.
We will never allow strangers to connect
to and control your PowerDot from their
phones!
Follow the Mobile Application’s onscreen
advice to scan for and activate your
PowerDots. Make sure your PowerDot (or
PowerDots) is turned on before you start
scanning.
Use the My Device screen (accessible
from the PowerDot app menu bar) to
activate another or additional PowerDot
devices, or to deactivate previously
activated ones. You can activate up to
two PowerDots at the same time.
Remember, you won’t be
able to use your PowerDot
(or PowerDots) until
you activate it with
your PowerDot Mobile
Application on your
smartphone!
Summary of Contents for Duo
