background image

Scroll Air Compressors Tankmount/Basemount

Powerex • 150 Production Drive • Harrison, OH  45030 • USA

Powerex Limited Warranty

Powerex 3 Year / 10,000 Hour Extended Parts Limited Warranty

- Powerex warrants each Compressor

Pump or Scroll Air-End against defects in material or workmanship from the date of purchase for a period of 

Three years or 10,000 hours

, whichever may occur first. This warranty applies to the exchange of part(s) of

the compressor pump or air-end found to be defective by an Authorized Powerex Service Center.

Powerex 1 Year / 5,000 Hour Inlet to Outlet Limited Warranty

- Powerex warrants each Compressor

Unit, System, Pump, or Air-End against defects in material or workmanship from the date of purchase for a
period of 

One Year or 5,000 Hours,

whichever may occur first. This warranty applies to the exchange of

defective component part(s) and labor performed by an Authorized Powerex Service Center.

The above mentioned warranty applies to POWEREX manufactured units or systems only.

Items listed in the operator’s manual under routine maintenance are not 

covered by this or any other warranty.

THERE IS NO OTHER EXPRESS WARRANTY. IMPLIED WARRANTIES, INCLUDING THOSE OF MERCHANTABILI-
TY AND FITNESS FOR A PARTICULAR PURPOSE, ARE LIMITED TO ONE YEAR FROM THE DATE OF PURCHASE:
AND TO THE EXTENT PERMITTED BY LAW, ANY AND ALL IMPLIED WARRANTIES ARE EXCLUDED. THIS IS
THE EXCLUSIVE REMEDY AND LIABILITY FOR CONSEQUENTIAL DAMAGES UNDER ANY AND ALL WAR-
RANTIES IS EXCLUDED TO THE EXTENT EXCLUSION IS PERMITTED BY LAW.

All claims pertaining to the merchandise in this schedule, with the exception of warranty claims, must be
filed with POWEREX within 6 months of the invoice date, or they will not be honored. Prices, discounts and
terms are subject to change without notice or as stipulated in specific product quotations. All agreements
are contingent upon strikes, accidents, or other causes beyond our control. All shipments are carefully
inspected and counted before leaving the factory. Please inspect carefully any receipt of merchandise not-
ing any discrepancy or damage on the carrier’s freight bill at the time of delivery. Discrepancies or damage
which obviously occurred in transit are the carrier’s responsibility and related claims should be made
promptly directly to the carrier. Returned merchandise will not be accepted without prior written autho-
rization by POWEREX and deductions from invoices for shortage or damage claims will not be allowed.

UNLESS OTHERWISE AGREED TO IN WRITING, THESE TERMS AND CONDITIONS WILL CONTROL IN
ANY TRANSACTION WITH POWEREX

any different or conflicting terms as may appear on any order form

now or later submitted by the buyer. All orders are subject to acceptance by POWEREX.

Summary of Contents for SBS0307





















Reviews: