Powerfist 8314106, User Manual

3

For technical questions call: 1-800-665-8685

V 2.0

8314106

3-1/2", 28°  

Framing Nailer

SPECIFICATIONS

Nail capacity

90 pcs

Nail length

2” to 3-1/2”

Operating pressure

70 to 115 PSI

Max. pressure

120 PSI

Air consumption

1.8 CFM @ 90 PSI

Air inlet

1/4” NPT

EXPLANATION OF THE NAILING ACTION

SINGLE ACTUATION MECHANISM:

 First, press the safety against the wood; next, pull the trigger to drive the fastener. 

After fastening once, fastening will not be possible again until the trigger is released and pressed again.

CONTACT ACTUATION MECHANISM: 

First, press the safety against the wood; next, pull the trigger to drive the fastener. 

First, pull the trigger; next, press the safety against the wood to drive the fastener. If the trigger is held back, a fastener will 

be driven each time the safety is pressed against the wood.

FULL SEQUENTIAL ACTUATION MECHANISM:

 First, press the safety against the wood; next, pull the trigger to drive the 

fastener. Follow the same sequence to continue driving fasteners.

IMPORTANT SAFETY PRECAUTIONS

WARNING! Read and understand all instructions before using this tool. Keep this manual for the safety warnings 

and precautions, operating, inspection and maintenance instructions. When using this tool, basic precautions 

should always be followed to reduce the risk of personal injury and/or damage to the equipment. Note that when 

this manual refers to a part number, it refers to the parts list included. Before allowing someone else to use this 

tool, make sure they are aware of all safety information.

WORK AREA

1.  Keep your work area clean and well lit. Cluttered and dark areas invite accidents.

2.  Operate in a safe work environment. Do not use machines or air tools in damp or wet locations. Do not 

expose to rain. Do not use power tools in the presence of flammable gases or liquids.

3.  Keep children, bystanders and visitors away from the work area. Do not let them handle tools or extension 

cords. No one should be in the work area if they are not wearing suitable protective equipment.

4.  Store unused equipment. When not in use, tools must be stored in a dry location to prevent rust. Always 

lock up tools and keep them out of reach of children.