8656969
36 in. Drum Fan
V 4.0
6
For technical questions call 1-800-665-8685
4. Prevent damage to the power cord by observing the following:
a. Do not pull on the cord to disconnect the plug from an outlet.
b. Keep cord away from heat, oil, sharp edges or moving parts.
c. Never use the cord to carry the device.
5. Do not allow people, mobile equipment or vehicles to pass over
unprotected power cords.
a. Position power cords away from traffic areas.
b. Place cords in reinforced conduits.
c. Place planks on either side of the power cord to create a protective trench.
UNPACKING
WARNING! Do not operate the device if any part is missing. Replace the
missing part before operating. Failure to do so could result in a malfunction
and personal injury.
Remove the parts and accessories from the packaging and inspect for damage.
Make sure that all items in the parts list are included.
Contents:
•
Drum Fan
ASSEMBLY & INSTALLATION
Numbered references in parenthesis (#1) refer to the included Parts List.
1. Insert a wheel (Fig. 1-1) into the
wheel shaft (Fig. 1-4). Align the
hole in the wheel shaft and the
wheel axle (Fig. 1-2).
2. Insert a screw (Fig. 1-3) and tighten
to lock the wheel axle in place.
3. Repeat with other wheel.
Fig. 1
