8
Power Legs
General Operating Instructions
Instructions for Use
1.
Press the Power Button to turn the device ON.
2.
Press the Program Button to cycle through the
preset programs or manual mode (NOTE: the
M Button can only be used to set the device
to manual mode when the device is first set to
automatic mode).
3.
Press the Start/Stop Button to begin the selected
program.
4.
Press the Time+/– and Speed +/– Buttons to
adjust the program’s time and speed (NOTE:
Certain programs will only allow you to adjust
either the time or the speed).
5.
If you want to stop the selected program while the
program is running, press the Start/Stop Button
again to return the device to standby mode.
6.
When you are done using the device, ensure that
the device is in standby mode. Then, press the
Power Button to turn the device OFF.
Operating Notes
•
Remote control range: about 8 feet (2.5 meters).
For optimum signal transmission, ensure that no
obstacles are placed between the device and the
remote control. Point the remote control at the
infrared receiver on the device.
•
When the device is in manual mode, you can set
the time before the massage starts and adjust the
speed during the massage.
•
When the P3 program is selected, you can set the
time before the program begins. You can adjust
the speed while the program is running.
•
When the P1 program is selected, the rotating
acupressure heads will stop operating as soon
as you place your feet on the device. This is
not a defect.
Correct Use Positions
Place the foot
arch or calf on the machine. To use it on
your back, place it on the back, rest and le
an on it.
• FEET/CALF:
Place the arch of your foot or your
calf on the machine.
• BACK:
Place the device on the back of a chair,
lean against the device, and activate the device.
Ensure that your hair is not touching the device.
Do not wear loose clothing when using this device
on your back.
PF_PL_IB_TP_ENG_V2_191217.indd 8
12/17/19 6:27 PM
