- 12 -
Introduction
Congratulations!
With your purchase you have decided in favour of a quality product. Familiarise
yourself with the product before taking it into use. To do this, read the following
operating instructions attentively. Use the product only as described and only
for the specified areas of application. Retain these instructions for future refe-
rence. In addition, pass these documents on, together with the product, to any
future owner.
Safety instructions
To avoid the risk of accidents and damage to the
appliance:
• Operate the pump ONLY when it is secured by the supplied mounting
against jolting, twisting and canting.
• Check the pump for a faultfree condition before ever taking it into use.
The pump may not be used if it shows signs of damage.
The drive shaft of the pump does not allow itself to be turned by hand.
This does not indicate that the pump is defective.
• Use only hoses certified as being able to withstand a pressure of at least
3 bars (44 psi).
• Check the plug-in connectors on the hoses for firm seating.
• Take steps to ensure that the fluid being pumped cannot come into contact
with the electric drill during pumping. Should it nonetheless occur, imme-
diately remove the power plug.
• Avoid the intake of coarse dirt, otherwise the pump could be damaged.
If needs be, use a filter on the suction hose.
IB_75640_PBMP30A1_LB5.qxd 05.06.2012 12:11 Uhr Seite 12
Summary of Contents for PBMP 30 A1
Page 3: ...A B...
