Protection
The POWERGRIP YG-3 Pure Power console is equipped with high grade protection. It consists of three levels:
1) Filter - blocks noise and small voltage spikes.
2) MOV protection - Absorbs high voltage spikes.
3) Relays - turn off power if voltage is over a high limit or if the MOV is overloaded.
You can therefore be sure that mains troubles will not damage your equipment.
The console itself can continuously operate at voltage up to 320V. In case the voltage is more than 320V a
simple fuse replacement will be needed.
Proper mains connection system
The YG-3 detects the existence of the ground and the proper connection phase. In case ground exists, and
the YG-3 power plug is connected with the wrong phase, operation of the unit will be blocked.
If grounding doesn’t exist, or the power line does not comply with TN standard this function is not available.
In this case you need to connect YG-3 as shown on diagram 13 by using a phase detecting tool.
Antenna grounding connector
In case an antenna is used in your system it is important to use the supplied antenna grounding cable.
Failure to do this can reduce filtering quality and void the protection function.
Connect the cable from the kit with the YG-3 grounding terminal (11), then connect the antenna to the
connector on the other side of the cable. The cable is not directional.
