1.General information
The coating thickness gauges work either on the magnetic induction
principle or on the eddy current principle, depending on the type of probe
used. You can select the type of probe via the MENU system.
The gauges conform to the following industrial standards:
GB/T 4956-1985
GB/T 4957·1985
JB/T 8393·1996
JIG 889·95
JIG 818-93
Features
-Measured Coatings: Non-magnetic coatings (e.g. paint, zinc) on steel;
Insulating coatings (e.g. paint, anodizing coatings) on no-ferrous metals
-Operating with MENU easily
-Two measuring mode: CONTINUE and SINGLE mode
'Two working mode: DIRECT and GROUP mode (4 groups)
'Statistic Display: AVG. MAX. MIN. NO., S.DEV
-One point calibrating and two points calibrating independently for each
working mode
-Zero calibrating easily
• Memory for 320 reading (80 for each group)
-Delete single readings and all group readings easily
-High alarm and Low alarm for all working mode
-Low battery, error indication
-USB interface for PC analysis software
-Disable Auto-Power-off function via MENU setting.
1-1. Application
-This compact and handy gauge is designed for non-destructive, fast and
precise coating thickness measurement. The principal applications lie in
the field of corrosion protection. It is ideal for manufacturers and their
customers, for offices and specialist advisers, for paint shops and
electroplaters, for the chemical, automobile, shipbuilding and aircraft
industries and for light and heavy engineering.
• This gauge is suitable for laboratory, workshop and outdoor use.
-The probe can work on both principles, magnetic induction and on the
eddy current principle. One probe only is required for coating
measurement both on ferrous and non-ferrous metal substrates.
It is adaptable to specific tasks: i.e. they can be used on special
geometries or on materials with special properties.
