1-5. Specifications
Sensor probe
F
N
Working principle
Magnetic induction
Eddy current principle
Measuring range
0~1250µm
0~49.21mils
0~1250µm
0~49.21mils
Guaranteed tolerance
(of reading)
0~850µm
(+/- 3% + 1µm)
850µm~1250µm
(+/- 5%)
0~850µm
(+/- 3% + 1.5µm)
850µm~1250µm
(+/- 5%)
0~33.46 mils
(+/- 3% + 0.039 mils)
33.46mils ~49.21mils
(+/- 5%)
0~33.46 mils
(+/- 3% + 0.059 mils)
33.46mils ~49.21mils
(+/- 5%)
Precision
0~50µm (0.1 µm)
50µm-850µm (1µm)
850µm~1250µm
(0.01mm)
0~50µm (0.1 µm)
50µm-850µm (1µm)
850µm~1250µm
(0.01mm)
0~1.968mils
(0.001mils)
1.968mils~33.46mils
(0.01mils)
33.46mils~49.21mils
(0.1mils)
0~1.968mils
(0.001mils)
1.968mils~33.46mils
(0.01mils)
33.46mils~49.21mils
(0.1mils)
Minimum curvature radius
1.5mm
3mm
Diameter of Minimum area
7mm
5mm
Basic critical thickness
0.5mm
0.3mm
Working temperature
0°C~40°C (32°F~107°F)
Working relative humidity
20%~90%
Size (HxDxW): 110x50x23mm / Weight: 100g
1-6.Front View
1. Probe
2. Power ON/OFF key
3. Zero Calibration key
4. Down/Right key
5. Blue key for ESC/NO/BACK function in menu mode, or
backlight
ON/OFF In working mode
6. Main display for coating thickness
7. Measuring unit
8. NFe: indicates readings on non-ferrous metals;
Fe: indicates readings on ferrous metals
9. lndicates the probe working principle: AUTO, Magnetic
induction or Eddy current
10. O-Indicates that the gauge is currently controlled via pc
11. USB connecting port
12. Low battery
13. Working mode indication: DIRECT or GROUP
14. Statistic display: AVG, MAX. MIN, SDEV
15. The statistic number of measuring readings
16. Red key for OKIYEs/ MENU!
SELECT in menu mode 9
17. Up/Left key
