Page 20 of 22
Troubleshooting
Use the table below to troubleshoot problems before contacting service personnel or your local
dealer. If the problem continues after troubleshooting, call your local dealer for assistance.
Failure
Possible Cause
Remedial Measure
Motor will not
start
Switch
Check the ON/OFF switch to ensure
that it is switched ON.
Fuel
Check the fuel supply.
Oil Level
If a motor is fitted, check the
crankcase oil level as an oil sensor
device is fitted to the motor which
prevents starting and stops the motor
when the oil level is low.
Spark Plug
Ensure the spark plug ignition lead is
connected.
Carburetor
Check the carburetor jet and bowl to
ensure they are clean.
Motor stops
Fuel
Check the fuel supply.
Fuel Cock
Check that the fuel cock is turned on.
Air Filter
Check the condition of the air filter.
Gas motor lacks
power
Air Filter
Check the condition of the air filter.
Spark Plug
Check the condition of the spark plug.
Insufficient
vibration
Belt
Check for a slipping or a missing belt.
Motor Speed
Check that the motor governed speed
is 3,500 r/min.
Machine is not
moving freely
Plate Underside
Check the underside of the plate for
material build-up.
Replacement Parts
For replacement parts and technical questions, please call Customer Service at
1-800-222-5381
.
Not all product components are available for replacement. The illustrations provided are a
convenient reference to the location and position of parts in the assembly sequence.
When ordering parts, the following will be required: model number, serial number/lot date code,
description, and reference number.
The distributor reserves the rights to make design changes and/or improvements to product lines
and manuals without notice.
