Assembly Instructions
33
Step 1
Install the Upper Hitch to the Tow Leg
Weldment. Use 5/16” x 3/4” Bolts and 5/16”
Flange Nuts to secure the Bracket. Using a
Torque Wrench, Tighten to 20lb-ft.
Install Leg to Tow Leg Weldment using
5/16 x 2-3/4 Bolt and 5/16 Nyloc nut.
Install Catch Pin through Hole in Tow Leg,
as shown.
Step 2
Install the High Pressure Fittings to the
Beam Assembly. Thread the fittings into the
cylinder. Orient the Fittings as shown.
Install the Tow Leg Assembly to the Beam
Assembly. Use 3/8” x 1 1/4” Bolts and 3/8”
Class G Nuts. Using a Torque Wrench,
tighten to 37lb-ft.
High-pressure
fittings
Beam assembly
Tow leg assembly
3/8”
class G
nut
3/8” x 1 1/4” bolt
Step 3
Attach the Beam Assembly and the Hose
Guide to the Hydraulic Tank Assembly.
Use 3/8” x 1-1/4” Bolts, and 3/8” Class G
Nuts. Using a Torque Wrench, tighten to
37lb-ft.
Install Grommets into the Hose Guide.
Beam assembly
Grommets
3/8” X 1-1/4” bolts
Tank assembly
Hose guide
3/8” class G
nuts
5/16” nuts
5/16” x ¾” bolts
Upper hitch
Tow leg weldment
Catch pin
Leg
5/16” x 2-¾” bolt
