Assembly Instructions
34
Step 5
Install the Tip Bracket to the Hydraulic
Tank Assembly. Use 5/16” x 1-1/2” Bolts
and 5/16” Flange Nuts to secure the Bracket.
Using a Torque Wrench, tighten to 20lb-ft.
Tip bracket
5/16” x 1-1/2” bolts
5/16” nuts
Step 6
Fasten Lever to Control Valve with Pins and
Bridge Pins as shown.
Bridge pins
Control valve
Lever
Pins
Wheel retainer
Stub axle
Tire
Bushing
Wheel retainer
Step 4
Install Wheel Retainer onto the end of the
Axle. The Wheel Retainer should be flush
with the end of the Stub Axle. Tighten the
Set Screw.
Slide the Stub Axle into the Tire. Slide a
Wheel Retainer on the backside of the Stub
Axle and tighten the Set Screw.
Slide the Tire and Axle Assembly into the
Bushing on the Tank. Secure with a 5/16” x
1-1/2” bolt and a 5/16” Nyloc nut.
