Assembly Instructions
34
Step 5
Install the Tip Bracket to the Hydraulic
Tank Assembly. Use 5/16” x 1-1/2” Bolts
and 5/16” Flange Nuts to secure the Bracket.
Using a Torque Wrench, tighten to 20lb-ft.
Tip bracket
5/16” x 1-1/2” bolts
5/16” nuts
Step 4
Slide Tire onto Axle with Valve Stem facing
out
Thread Axle Nut onto Axle (hand tight)
Back Axle Nut off ¼ turn
Make sure Tire spins freely
Insert Cotter Pin through hole in Axle and
bend it so Axle Nut cannot come off
Make sure Tire spins freely
Tap Dust Cap onto Tire with a soft faced
mallet
Repeat steps for the other Tire
Step 6
Fasten Lever to Control Valve with Pins and
Bridge Pins as shown.
High speed
axle
Tire
Slotted jam
nut
Cotter pin
Dust cap
Bridge pins
Control valve
Lever
Pin
Summary of Contents for M11571E
Page 2: ...Hazard Signal Word Definitions 2...
Page 24: ...Parts Breakdown Exploded View Rev E 24...
Page 32: ...Assembly Instructions 32...