Powerhorse M1181A.1 Owner'S Manual Download

Page: 3 / 4

Assembly Instructions

Closely inspect all log splitter components.

If you have missing or damaged components, please contact Powerhorse Product Support at 1-866-443-2576.

Step 1 – Attaching Right Fender



Install the Right Fender (Part Number 790637) to the Log Splitter
Axle.



Use (2) M8-1.25 Flange Bolts, (2), M8 Flat Washers, and (2) M8-1.25
Nyloc Nuts.



Torque to 21 ft.-lb.

Fasteners Needed:

(fasteners shown in actual size)

Tools Needed



13mm Wrench

Flat Washer

Right Fender

Flange Bolt

Nyloc Nut

Part # 82292

M8-1.25 x 20 Flange Bolt

Qty: 2

Part # 777495

M8-1.25 Nyloc Nut

Qty: 2

Part # 82564

M8 Flat Washer

Qty: 2

Summary of Contents for M1181A.1

Page 1: ...and or changes in specifications at any time without incurring any obligation to install them on units previously sold Any Questions Comments Problems or Parts Orders Call Powerhorse Product Support...

Page 2: ...autious and drive slowly when traveling over rough terrain Under the influence Never tow this splitter while under the influence of alcohol drugs or medication On public roads If towing on a public ro...

Page 3: ...nder Install the Right Fender Part Number 790637 to the Log Splitter Axle Use 2 M8 1 25 Flange Bolts 2 M8 Flat Washers and 2 M8 1 25 Nyloc Nuts Torque to 21 ft lb Fasteners Needed fasteners shown in a...

Page 4: ...Part Number 791080 to the Log Splitter Axle Use 2 M8 1 25 Flange Bolts 2 M8 Flat Washers and 2 M8 1 25 Nyloc Nuts Torque to 21 ft lb Fasteners Needed fasteners shown in actual size Tools Needed 13mm W...