background image

 

11

Limited Warranty

 

 

Dear Valued Customer: 
   

The Powerhorse Product you just purchased is built with the finest material and craftsmanship.  Use this 

product properly and enjoy the benefits from its high performance.  By purchasing a Powerhorse product, you 
show a desire for quality and durability.  Like all mechanical equipment this unit requires a due amount of care.  
Treat this unit like the high quality piece of machinery it is.  Neglect and improper handling may impair its 
performance.  Please thoroughly read the instructions and understand the operation before using your product. 
 

Limited Warranty 

 

Powerhorse shall warranty any

 

piece of equipment manufactured, or parts of equipment manufactured, to be 

free from defects in material or workmanship for a period of 2 years for noncommercial/nonrental use and a 
period of 90 days for commercial/rental use from the date of purchase by user. 
 
Powerhorse shall warranty any wear item, including, but not limited to, valves, seals, pump diaphragms, hoses, 
and filter elements to be free from defects in material or workmanship for a period of 90 days from the date of 
purchase by user.  This warranty applies to the original purchaser of the equipment and is non transferable. 
Verification of purchase is the responsibility of the buyer. Parts will be replaced or repaired at no charge, except 
when the equipment has failed due to lack of proper maintenance. Any misuse, abuse, alteration or improper 
installation or operations will void warranty. Determining whether a part is to be replaced or repaired is the sole 
decision of Powerhorse. 

 
 

NOTE: 

Some services performed by parties other than Powerhorse may void warranty. 

 
 

This warranty covers parts only. It will not provide for replacement of complete products due to defective parts.  

Components not manufactured by Powerhorse are guaranteed by their manufacturer and can be serviced at 

factory-authorized locations near you. Any costs incurred due to replacement or repair of items outside of a 

Powerhorse approved facility is the responsibility of the buyer and not covered under warranty. Powerhorse can 

supply you with the service center location in your area. 

 

This warranty specifically excludes the following; failure of parts due to damage caused by accident, fire, flood, 
windstorm, acts of God, applications not approved by Powerhorse in writing, corrosion caused by chemicals, use 
of replacement parts which do not conform to manufacturer’s specifications, and damage caused by vandalism. 
Additional exclusions: loss of running time, inconvenience, loss of income, or loss of use, including any implied 
warranty of merchantability of fitness for a specific use. 

 
 

Warranty does not cover items subject to normal wear such as tires, receptacles or any part subject to direct 
physical contact by the public. This warranty does not cover any personal injury or damage to surrounding 
property caused by failure of any part.  

 
 

This warranty is in lieu of any other warranty expressed or implied and Powerhorse assumes no other 
responsibility or liability outside that expressed within this warranty. 
 
 
Please fill in the following information and have it on hand when you call in on a warranty claim. 
 
Customer Number: ______________________________________________________________ 
 
Date of Purchase: _______________________________________________________________ 
 
Powerhorse Serial Number: _______________________________________________________ 
 
Item Number: __________________________________________________________________ 
 

 
 

Summary of Contents for M46851C













Reviews: