background image

 

3

WARRANTY 

 

 

 

We warrant this product against any manufacturing defects in material and 
workmanship for a period of one (1) year from date of purchase. This 
warranty is valid only by completion of the warranty card AND original or 
photocopy of sales receipt. 
 
This warranty does not cover any defects or damages caused by the 
following: 

 

Misuse of the product. 

 

Negligence or lack of maintenance. 

 

Normal wear on parts. 

 

Use of parts not manufactured by the manufacturer.  

 

Modification or removal of parts.  

 
NOTE: Do Not Return This Product To The Store Where It Was Purchased. 
To make a claim, write to Sylvan Company, Inc. at the address below. Customer Service 
will inform you of the appropriate procedure to follow. The Warranty Card must be 
attached to the sales receipt and be presented when Warranty Services are required. 
 
The purchaser is responsible for all related expenses if product is not covered under 
warranty.  
 

NAME: ____________________________________________________________ 
ADDRESS: _________________________________________________________ 
                    _________________________________________________________ 
STORE WHERE PURCHASED: ________________________________________ 
DATE OF PURCHASE: _______________________________________________ 
MODEL: ___________________________________________________________ 

 

SCH Imports 
5958 Snow Hill Road 
Suite #144 P126 
Ooltewah, TN, 37363 
 

 

IMPORTANT: KEEP FOR FUTURE REFERNCE!

Summary of Contents for LS7T-52

















Reviews: