4
Thank you for purchasing Type LS7-52
7-Ton Log Splitter. Please carefully read
this operation manual and strictly
observe these instructions for your safety
and those around you. Following these
instructions will ensure long and
satisfactory use of this product.
GENERAL SAFTEY RULES
Warning:
Operation and use of this machine has
risk but caution can reduce risk or
personal injury. Negligence of basic
safety precautions can result in injury to
the operator or property damage.
1. Read and fully understand the
operation manual, including the
operation and scope of application as
well as potential hazards.
2. Check for damaged parts before use.
If a part appears to be damaged,
determine if the damage will interfere
with normal operation and intended
function of the log splitter before taking
further action. Note the function of
moving parts and other conditions that
may have a negative impact on the
normal operating performance of this
machine. Damaged parts must be fixed
or replaced as required.
3. Make sure power cord is not
damaged.
4. Before starting ANY maintenance,
calibration, or part replacement on the
machine, switch power OFF and
UNPLUG machine from power outlet.
5. Maintain the machine so it is always
ready for use.
6. It is strongly recommended for the
operator and those nearby to wear ear
protection, eye protection, and work
gloves.
7. NEVER operate this machine under
the influence of drugs, alcohol, or
medicine.
8. NEVER stand on the machine or you
risk injury due to falling.
9. NEVER operate this machine without
supervision.
10. Turn off machine when it has
completely stopped.
11. Take care to maintain a safe
distance between your hands and the log,
and between the pusher and wedge. If
machine is turned ON, never place hands
on moving parts of the machine.
12. NEVER wear loose clothing or
jewelry when operating the machine.
Keep long hair tied back to avoid getting
it entangled in the machine.
ELECTRICAL CONNECTION
Connect the power cord to a standard
power supply via an approved plug or
suitable protective isolated switch. The
power supply should meet specifications
stated on the receptacle cover.
Extension cord
It is recommended to connect the
machine’s extension cord to a moisture-
proof plug and avoid exposure to
moisture.
This cord will produce a voltage drop,
which can prevent the electrical motor
from operating at full power, therefore
decreasing the machine’s performance.
To prevent this, make sure the power
cord satisfies the following
specifications:
0 – 10 meters / 0 - 32.1 feet
Diameter of cord: 5 square millimeters /
05 centimeters squared.
NEVER use extension cord exceeding
10 millimeters.
If in doubt, contact a qualified
electrician. Do not make an electrical
repair yourself.
Symbols used
