POWERJET 260 PRO Injector Cleaner & Tester
General Notice & Disclaimer
All rights reserved! Any company or individual person shall not copy or backup this user manual in any format
(electronic, mechanical, photocopying, recording or other formats) without written permission from us. The manual is
for the use of the products manufactured by our company, which shall not assume any responsibility for the
consequences arising from the use of it to guide the operations of other equipment.
The device is intended for the use of professional technicians or maintenance and repair personnel.
We assumes no responsibility for device damages or problems resulted from the usage of other parts or consumables,
rather than original products of us or products approved by the company.
Important Safety Instructions
•
Please read this manual carefully before using the equipment.
•
Be careful when touching high temperature parts of the equipment or engine.
•
Please do NOT touch hot parts or rotating fan blades.
•
If use a low-quality power cord, it may cause overheating.
•
The device should be cooled completely before storage and the line should be wound up.
•
The cleaning agent for the device is a flammable and weakly volatile liquid. Smoking and lighting fires are strictly
prohibited during the cleaning process.
•
The instrument should be placed in a room that is not exposed to direct sunlight and is well ventilated, and signs
“Smoking and lighting fires strictly forbidden” and “Danger warning of inflammables” should be posted.
•
The operator’s hair, clothes, fingers and other parts of the body should be kept away from the operating parts of
the equipment.
•
To prevent electric shocks, do you touch the operating equipment in wet areas or operate it in the rain.
•
Please operate the device as described in the manual. Use accessories recommended by the manufacturer.
•
It is strictly forbidden to open the ultrasonic system under the circumstances that ultrasonic cleaning agent has not
been added into the ultrasonic cleaning pool. Otherwise, the ultrasonic equipment may be damaged easily.
•
The housing of the device must be reliable and grounded.
•
Automobile exhaust contains a variety of toxic and harmful gases (such as carbon monoxide, hydrocarbon, nitrogen
oxide and etc.). During the test, the exhaust should be directed outdoors and the room should be well ventilated.
•
The temperature of the exhaust pipe and water tank of the automobile’s engine is high. Do not touch them to
prevent burns.
•
Please pull up the handbrake of the vehicle to be cleaned, shift the transmission to neutral position and block the
front wheel before free disassembly cleaning.
•
Wear safety glasses when operating. Daily wear glasses are not safety glasses.
•
When disconnecting a pressurized fuel pipe union, please cover the union with a towel to avoid getting hurt by
fuel gushing out and causing fires.
•
Test solution is used by the main unit of the device uses, and ultrasonic cleaning agent is used for ultrasonic
cleaning.
:
INDICATES WHERE ATTENTION SHOULD BE PAID WHEN OPERATING THE DEVICE.
:
indicates the possibility of product damage and personnel injury during operating.
