7
Technical Data
Battery Voltage* ................................ 24 V D.C.
Battery Capacity ............................... 4.0 Ah
Battery Run Time Max
..................... 20 mins
Charger Input ...................................
100 – 240 V AC,
50 – 60 Hz, 50 W
Charger Output ................................
25.2 V DC
1400 mA
Charging Time Max
.......................... 2 hrs 40 min
Motor ................................................ 210 W
Max Flow ..........................................
3.2 Gallon/charge
12 l/charge
Nozzle Size
.......................................
1.5 mm/1.8 mm/2.2 mm
Max Viscosity ...................................
85 – 100 DIN-s
Paint Container Capacity .................
32 fl oz (1.0 l)
Weight (Paint sprayer alone)
.............
2.64 lbs (1.2 kg)
Weight (With battery installed)
..........
4.4 lbs (2 kg)
*Initial no-load voltage, when fully charged, peaks at 24 volts; nominal voltage
under typical load is 21.6 volts.
Unpacking
Carton Contents
• Sprayer turbine assembly
• Spray gun assembly
• 2 nozzle tips (the third one is pre-assembled inside the
paint sprayer)
•
Viscosity cup
• 24V iON+ lithium-ion battery
• 24V iON+ lithium-ion battery charger
• Needle clean-out tool
• Cleaning brush
•
Manuals with registration card
1.
Carefully remove the cordless paint sprayer and check to
see that all of the above items are supplied.
2.
Inspect the product carefully to make sure no breakage or
damage occurred during shipping. If you find damaged or
missing parts, DO NOT return the unit to the store. Please
call the Snow Joe
®
+ Sun Joe
®
customer service center at
1-866-SNOWJOE (1-866-766-9563).
NOTE:
Do not discard the shipping carton and packaging
material until you are ready to use your new cordless paint
sprayer. The packaging is made of recyclable materials.
Properly dispose of these materials in accordance with
local regulations.
IMPORTANT!
The equipment and packaging material are
not toys. Do not let children play with plastic bags, foils,
or small parts. These items can be swallowed and pose a
suffocation risk!
Assembly
m
WARNING!
Do not insert the battery until assembly is
complete. Failure to comply could result in accidental starting
and possible property damage.
m
WARNING!
Assemble this unit in well ventilated area.
Make sure there's no flammable vapors
around.
1.
Make sure the quick release knob is in the unlock position,
and insert the spray gun assembly fully inside the opening
on the end of the sprayer turbine assembly (Fig. 1).
2.
Push and
rotate the quick release knob to
lock in position
to fix the assembly (Fig. 2).
Battery Pack Operation
The equipment is powered by a lithium-ion battery. The battery
pack is completely sealed and maintenance free.
m
WARNING!
Before first use, the battery requires at least
2 hrs 40 min charge time to be fully charged. When the battery
is at low capacity, recharge for 2 hrs 40 min again before
resuming operation.
Battery Charge Level Indicator
The battery pack is equipped with a push button for checking
the charge level. Simply press the push button to read off the
battery charge level from the LEDs of the battery indicator:
Fig. 1
Quick
release
button
Spray gun
assembly
Turbine
Fig. 2
Lock
Unlock
1
Push in
2
Rotate
Summary of Contents for 24V-PS1
Page 20: ...snowjoe com ...
