PowerKiss Jig, User Manual

14

Additional safety instructions

• PowerKiss Router Jig is compatible with all plunge-capable routers that 
can be fitted with a 17mm copy ring. If a 17mm ring is not available for your 
router, you can fit the following subplate and ring:  http://www.trend-uk.
com/en/FI/productlist/4/1008/Universal_Sub-base.html

• Switch of and disconnect router from the mains when not in use, before 
servicing and changing the cutter

• Before using any power tool, check first for damaged parts and if found, 
do not use them before the part or parts have been replaced with new 

ones

• Before using the jig, we recommend you practice a few joints with off-cuts 
of worktops or other materials to familiarize yourself with the jig

• Always ensure that the path of the router is kept clear of any obstruction 
e.g. clamps

• Always ensure that the cable of the router is clear of the jig and is of 
sufficient length

• Do not switch router on with the cutter touching the work piece

• Do not force the router to work fast. This will result in a poor quality cut 
and can also damage expensive router bits

• Never remove the router from the jig whilst it is still in motion

• Always allow the router to stop and switch off before removing

• Always keep the router base parallel to the jig, and the router in an 
upright position. Failure to do so will cause an unmatched joint