10
2 0.2V 7 0.7V
3 0.3V 8 0.8V
4 0.4V 9 0.9V
Example:
To set the desired DC power supply of 14.3V, firstly, choose the rotate switch of battery
type to be
“
0
＂
and then choose the rotate switch of boost voltage to be
“
1
＂
; finally,
choose the rotate switch of float voltage to be
“
3
＂
.
BTS/Remote Control
It is a port for phone jack of the battery temperature sensor and upcoming remote control
to be connected.
Troubleshooting Guide
Problem and Symptoms
Possible Cause
Solution
No alternative current or
main fuse is melted down
Check the fuse and replace
it
No output voltage and/or
intensity
Main or generating unit too
weak
Check the input voltage
Battery consumption > power
of the charger
Reduce the consumption on
the battery
Charger delivers a weak
output voltage but a max.
intensity
One or several elements of
the battery present a
short-circuit
Check that there 's no
increase of battery
temperature
Battery is almost totally
charged
Check that the charger is on
a floating mode
Intensity of charge is too
weak < 10%
Alimentation is too weak
Check the input voltage
Consumption on the battery
during the charge is too
important
Decrease the consumption
Time of charge is too short
Choose a more powerful
charger
Battery temperature too weak Use a temperature sensor
Battery is never totally
charged
Defective battery
Change the battery
Loss (emission of gas)
Change the battery or check
the level of water
Battery is quickly empty
Sulfate on / stagnation
Charge / discharge several
time the battery or check
the charging curve or
replace the battery
Defective battery
Replace the battery
Battery is hot/emission of
gas
Temperature of the battery is
too high
Use a temperature sensor
and/or check the charging
curve
